Full Systems
VIXEN AIR VXX2593/480CH AIR SUSPENSION KIT FOR TRUCK/CAR BAG/AIR RIDE/SPRING. ON BOARD SYSTEM, 200PSI COMPRESSOR, 2.5 GALLON ALUMINUM TANK
SKU: VXX2593/480CH
Tag: Full Systems
EXCLUSIVE COUPON CODE VIXEN10
save 10% - 45 day returns - additional 6 month warranty200 PSI Air Compressor, 5 Gallon Aluminum Air Tank, Eight Pre-wired 2-way Integrated Air Valves,2-3/8″Triple Display Digital Air Pressure Gauge, Pressure Switch, Relay with plug, Air Filter Remote Kit
Description
This on-board system comes with a 2.5 Gallon aluminum air tank featuring 16 air ports and 8 integrated valves, one 200 PSI heavy duty chrome color air compressor with remote filter kit, a triple display digital pressure gauge with five electronic air pressure sensors and a complete accessory kit which includes pressure switch, relay with plug, fuse, hose, fittings, thread sealant and hose cutter. All fittings in this system are manufactured to the highest standards with premium brass material for maximum strength and durability.
- Air Compressor
- 200 PSI Air Compressor Chrome Color
- 12V Permanent Magnetic Motor
- Maximum Working Pressure: 200 PSI
- Duty Cycle: 100% @ 100 PSI
- Amperage Draw: 23A
- Flow Rate: 1.8CFM @ 0 PSI
- Sealed Construction
- Oil-less Design
- Moisture and Dust Resistant
- Anodized Aluminum Alloy Cylinder
- Automatic Reset Thermal Overload Protector
- Mounting Plates with Vibration Isolators
- 3/8″ NPT Stainless Steel Braided Leader Hose with 3/8″ NPT Check Valve
- Intake Air Filter with Remote Installation Kit (10 FT Hose and Two replacement filter elements Included)
- Insulated Wiring with Connectors
- 40A 4-PIN Relay with Pre-wired Plug
- 40A In-line Fuse with Waterproof Holder
- Mounting Hardware Included
- Dimensions: 13-¾” L x 4″ W x 6-¾” H
- Air Tank and Gauge
- 2.5 Gallon Aluminum Air Tank with 8-valves Integrated (4-Corner)
- Capacity: 2.5 Gallon (10 Liter)
- Pressure Rating: 220 PSI
- Power Source: 12V
- 16 Ports: 4 x 3/8″ NPT (Air Bags), 4 x 1/8″ NPT (Air Gauges), 2 x 1/8″ NPT (Valves Exhaust), 2 x 3/8″ NPT, 4 x ¼” NPT
- Eight pre-wired 2-way fast response air valves (4 on each side) integrated directly into the air tank’s end caps, the ideal set up for a simple, clean and easy to install 4-corner suspension system
- Four strong Steel retention bars that not only secure both end caps but also serve as protection to the tank.
- Seamless Design
- Weld-less Construction Prevents Leaks
- Brushed Anodized Finish
- 100% Weather Resistant
- Air Gauge Measurement Unit: PSI/BAR
- Three Blue 3-Digit Digital Display
- Measure Air Pressure from Five Different Air Sources
- Strong ABS Housing with Metal Base Included
- Gauge will fit on any dash panel with a minimum of 2-3/8″ Diameter hole
- Dimensions (with brackets): 26-1/8″ L x 7-1/8″ W x 7-¼” H x 6-½” Dia
- Accessory Kit
- 2-3/8″ Triple Display Digital Pressure Gauge (3 Display/5 Source)
- 1/8″ NPT Male Electronic Air Pressure Sensors with 6-½ Feet Wire Harness x 5
- ¼” NPT 150-180 PSI Air Pressure Switch x 1
- ¼” NPT Male to 1/8″ NPT Female Thread Reducer x 1
- 3/8″ NPT Push to Connect (PTC) Straight Pneumatic Fitting for 3/8″ OD Hose x 4
- 3/8″ NPT Male Plug x 1
- ¼” NPT Male Plug x 3
- 1/8″ NPT Male Plug x 4
- L Steel Brackets x 2
- 3/8″ OD Nylon Hose 50 FT
- Air Hose Cutter x 1
- Thread Sealant 10ml x 1
- Premium Mounting Hardware